Installing a stair runner yourself requires a bit of patience. You should have a staple gun and a flat-head screwdriver. Use the staple gun to staple the runner on the stair steps in regular intervals. Then, using your flat-head screwdriver, tuck out the staples. Once the runner is secured, pull it taut over the lip of the stair tread. Next, use a bolster chisel to cut the extra length of the runner. After that, staple it to the bottom riser.c
Before installing a stair runner, measure and mark the runner’s base. You should measure the distance from the base of the stair tread to the beginning of the runner. This will ensure the carpet pad bits are properly centered.
The runner itself is easy to install and can look custom if you know how to do it properly. Besides the runner, you’ll need a staple gun, a carpet pad, and a bolster chisel, which is basically a glorified scraper. A bolster chisel will help you make a clean crease where the tread meets the riser.
Installing a stair runner yourself can be challenging, but it can be done. Once you’ve completed this project, you’ll be surprised at the results! You can even install a waterfall on a staircase if the treads are even. Just make sure to use a good adhesive to prevent the runner from tearing and rips.
Depending on your stairs, you may need more than one runner. Always measure each stair before you start installation. You’ll want the runner to line up with the edge of the landing. It’s also best to purchase several runners for long stairs.
If you’re installing a runner on stairs, you’ll need to measure the riser height and tread height. Divide these two measurements by two, and you’ll have a good idea of how long you need a runner to cover the stairs. You’ll also need to measure the nose of each step, which is the lip that surrounds the tread.
Stair runners can add character and polish to any interior staircase. Installing a runner covers up damaged or unsightly stair treads and creates a welcoming feel. The good news is that you don’t need to hire a professional to install one. Alternatively, you can do it yourself with a few inexpensive supplies.
